Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length

Question

Question:

Ok I found they are 2700lb axles.

asked by: Rich

0

Expert Reply:

If you can get me your axle capacity I can let you know which leaf spring would work best.

expert reply by: Jameson C

0

Rich

6/16/2022

Ok I found they are 2700lb axles.

Jameson C.

6/16/2022

The best solution then would be the part # e48SR which is 26 inches long and are rated for 4,000 lb axles. It would be a little more capacity than you'd need but would still work great.

Answer 1

The 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long #e48SR is a good replacement for your boat trailer as it meets all of the specs and is compatible with an axle that's just a little higher when it comes to weight rating.…

view full answer...

Answer 2

When choosing a replacement leaf spring for your trailer suspension you will want to choose a leaf spring that is compatible with your hangers and that has the proper weight capacity rating. I have attached a link to our available selection of leaf…

view full answer...

Answer 3

Hello Joseph; more than likely we have everything you need but I don't have a way of knowing what brackets were used on that trailer. The Tie Down Carpeted Bunk Boards for Boat Trailers - 5' Long #TD57FR will match what you have now. The CE…

view full answer...

Answer 4

The Optronics kits part #TL5RK and #TL29BK are both very similar. Only real difference is there is a slight housing design difference between the two main taillight assemblies with the #TL29BK having the more recent design. Both are great kits that…

view full answer...

Answer 5

The mounting studs on the lights included with trailer tail light kit #TL5RK are 2 inches apart on center. I have linked a video showing an example installation of this kit for you.

view full answer...

Answer 6

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building a…

view full answer...

Answer 7

Thank you so much for the picture and the dimensions, that is exactly what I needed to find you a replacement stud. I recommend the Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long item #7-122. I have attached a diagram showing…

view full answer...

Answer 8

Hi Richard, I'm pretty sure they are the same thing, and the issue is mostly rounding (bear with me a second). The wheel studs that say they have a .54 generally have a .545. Technically, that should round up to .55, but not all do for one reason…

view full answer...

Answer 9

You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant…

view full answer...

Answer 10

I contacted Grand Design to see if they could help. From your VIN number they reported the the spring you are using is Item number 130041 "Axle Spring for 35K Axle Dexter" and provided the attached picture. The pictured axle is marked…

view full answer...

Answer 11

Hey Charles, The Curt Trailer Hitch Receiver #C34RV is just a pre-order still so we don't have any concrete dimensions to go off yet. It looks like the #C77FR, which fit prior model years was recently tested and confirmed to fit though so I can…

view full answer...

Answer 12

I can help you determine the right replacement double-eye leaf springs for your Keystone Hideout, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf…

view full answer...

Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length

Product Page this Question was Asked From

Continue Researching