Can 4-Way on 2019 Jeep Wrangler Be Replaced With 6-Way for Flat Towing

Updated 05/24/2022 | Published 05/21/2022

Products Featured in This Question

RoadMaster 6-Wire Trailer Connector - Vehicle End

(361)

$24.10

Hopkins Endurance Flex-Coil Trailer Connector Adapter w/ Nite-Glow - 7-Way to 6-Pole - 8' Long

(249)

$59.93

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3188)

$175.28

Question:

i currently tow a 2019 Jeep Wrangler behind my motorhome. The power cord is a round 7 way connected to the motorhome to a 4 way round connection to the Jeep. Can I replace the 4 way socket on the Jeep with a 6 way socket without rewiring the Jeep? This way I could run a 7 way from the motorhome to a 6 way on the Jeep which would also allow me to add a battery charge line kit to the Jeep. I assume I would have to attach the 4 wires on the Jeep in the proper location on the 6 way. Do you a diagram that can show me which posts to attach the 4 wires? Thanks

asked by: Doug M

Helpful Expert Reply:

Yes, you can replace the existing 4-way with a 6-way socket like the RoadMaster 6-Wire Trailer Connector - Vehicle End # RM-910030-7. If you need the 6-way to 7-way then you can use the # HM47053. If you need the diode kit with everything included then you can use the # RM-15267.

I have attached some review and installation videos along with a diagram showing how to wire the 6-way for your reference.

expert reply by: Robin H