Correct MORryde X-Factor Crossmember for CRE Equalizer

Question

Question:

Which x factor part number should I order for my CRE 3000 equalizer?

asked by: Rick S

0

Expert Reply:

I checked directly with MORryde for you, and verified the correct X-Factor crossmember for your CRE equalizer; what you will need is the following part number:

- MORryde X-Factor Crossmember # MR33WR

The # MR33WR is for MORryde CRE, SRE, or stock suspension systems, so it will work with your CRE equalizer.

expert reply by: Kyle S

0

Answer 1

Hey Lance, welcome back! To replace your equalizers and shackles, I am going to need you to take a couple of measurements because I have no way of knowing what size the ones on your Heartland Cyclone are and we've got two options for both. To the…

view full answer...

Answer 2

MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR. This is the MORryde part number XF12-001.

view full answer...

Answer 3

Hey Chad; since your tandem 3,500 lb axles have a 3" diameter you need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560. The kit comes with everything you need for installation aside from standard tools.…

view full answer...

Answer 4

We do have a MORryde X-Factor Crossmember that is compatible with the CRE. However, the #MR99ZR you were looking at only works with the LRE, RE, or TRE suspension systems. What you need instead is the #MR33WR. This is compatible with CRE, SRE, or…

view full answer...

Answer 5

The MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR includes new wet bolts for the hangers on your 2022 Keystone Montana High Country 351BH 5th wheel camper. So you will not loose the ability to grease your hanger bolts.

view full answer...

Answer 6

The MORryde X-Factor Crossmember #MR33WR is compatible with the Equa-Flex #LC279687 so you will be able to use both on your trailer. You can stick with MORryde for the wet bolt kit and get their Suspension Upgrade Kit for Tandem Axle Trailers. You…

view full answer...

Answer 7

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for even…

view full answer...

Answer 8

Hi Dan, Yep, you've got it right; the correct crossmember for the CRE3000 center equalizer is indeed the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR.

view full answer...

Answer 9

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of the…

view full answer...

Answer 10

I do have an option for you. While we do not have the exact ones from MORryde available by themselves, you can use the Replacement Wet Shoulder Bolt #LC126197 as a replacement for the longer wet bolts in the kit that comes with the MORryde X-Factor…

view full answer...

Answer 11

I can certainly point you in the right direction. Fitment of the MORryde X-factor crossmember will depend on what kind of suspension is on your trailer. This kind of detail is not listed in the Forest River online user guide, so we will need to take…

view full answer...

Answer 12

I spoke with MORryde and they said that the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR will work just fine with your frame hangers with gussets. You'll just need to use the circled items attached in the image below and…

view full answer...

Correct MORryde X-Factor Crossmember for CRE Equalizer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching