Replacement Converter Section of 6332A

Question

Question:

I intend to replace my Magnetic 6332a converter on a truck camper with one 12 volt battery to a PD4635v and 2 - 12 volt batteries in parallel. It is advertised as a direct fit. Could I replace it with a PD4645v instead? Ot is that unnecessary, unsafe or not advisable?

asked by: Jim E

0

Expert Reply:

Since you have a 35 amp setup now you need to stick with the 35 amp Progressive Dynamics converter section replacement # PD4635V.

expert reply by: Jameson C

0

Answer 1

If you just need to replace the converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now. The built-in Charge…

view full answer...

Answer 2

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 3

You are correct the 6332 model Magnetek converter is not compatible with Lithium batteries. To upgrade to a lithium battery system you will need to replace the entire power center with the Progressive Dynamics RV Power Control Center item #PD4135K.…

view full answer...

Answer 4

We do have the correct replacement converter/charger for your system. - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V works with…

view full answer...

Answer 5

Hi Jeff, We do have an option for you to replace your Magnetek 6300 Model 6332 converter, from Progressive Dynamics: - Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V You will be able to use your current setup regarding…

view full answer...

Answer 6

Absolutely, I can help with that, and I’m glad you checked before ordering because with older units like yours it’s important to get the right fit the first time. Yes, you can replace your Series 6300 model 6332 converter and keep your existing…

view full answer...

Answer 7

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is a replacement for your converter. It will work very well based on the cross-referencing for a perfect fit. All converters have a battery charging system…

view full answer...

Answer 8

Hello Jason, thanks for reaching out. The low charge rate you are seeing is pretty typical with the WFCO WF-8935-AD when used with lithium batteries. The Progressive Dynamics replacement section #PD4635V is a much better match for a lithium setup. It…

view full answer...

Answer 9

Hi! If your Magnetek 6300 Q Series converter, model 6332, has stopped working and you just need to replace the converter section, the part you want is the Replacement Section for AC/DC Power Distribution Panel Part #PD4635V. This is a direct…

view full answer...

Answer 10

Hey Amy, if you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V that you referenced will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have…

view full answer...

Answer 11

Hello Nate, sure can! The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now. We get asked about replacing those…

view full answer...

Answer 12

Hey Carl, yes the Replacement Section for AC/DC Power Distribution Panel #PD4635V that you referenced was designed to replace the lower section of your Magnetek Power Plus series 6300A Model 6332. I am not sure where you saw 32 amps as the output…

view full answer...

Replacement Converter Section of 6332A

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching