5 on 4-1/4 Idler Hub Compatible With CE Smith Trailer Axle CE33201GA
Updated 04/26/2022 | Published 04/24/2022
Products Featured in This Question
Question:
Will this hub kit fit CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles - Galvanized - 57-1/2inch Long - 1.8K Item # CE33201GA you sell? Will the EZ grease caps fit that axle also? Would I need a additional parts for that hub kit? Thanks
asked by: John L
Expert Reply:
Yes, the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K will fit the CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles # CE33201GA. The EZ grease caps that come with the hub assembly will work with the EZ grease spindle on the axle.
The only other thing you will need to install the Hub on the Axle would be Grease # L11315 and a Grease Gun # L30416 to ensure the hub gets fully filled with grease.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Search Results: ce smith trailer axles
- Search Results: spindle nut
- Search Results: spindle castle nut
- Search Results: hub assembly
- Q&A: How Does Grease Reach The Bearings On The CE Smith Trailer Axle Beam # CE33201GA?
- Q&A: How To Install 13 Inch Tires On A Right on Trailer Multi Sport Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Availability Of Replacement Hub For Dico 45263
- Q&A: Recommended Pre-Greased Hub To Replace DICO 45623 Hub On Shoreland'r Boat Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Correct Replacement Idler Hub for Triton 2 Place Snowmobile Trailer
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)