What Size O-Ring is Needed for Lippert Replacement End Fitting for Hydraulic Hose

Updated 04/18/2022 | Published 04/16/2022

Question:

What size would the O ring be for this? Thank you

asked by: Craig M

Expert Reply:

The Lippert Replacement End Fitting for Hydraulic Hose on RV Leveling Systems - ORFS # LC249363 uses an ORFS or O-ring face seal fitting. The 1/4" female port does not use an O-ring so there is no size available. The O-ring will depend on the male side, which sits in the groove in the face of the fitting. This will compress against the flat face on the # LC249363 to create the seal.

expert reply by: Robin H