Can Go Power Solar Flex Eclipse be Easily Added to Go Power Setup on RV

Question

Question:

hi i already have the basic system with the 100 watt panel installed on my rv. this was a factory install. Can i add this panel with the existing 100 w panel and just use the branch connectors? is that all i need to make it work?

asked by: Matt B

0

Expert Reply:

Yes, you can add the Go Power Solar Flex Eclipse Expansion Kit # GP77MR to your current setup using the included MC4 branch connectors like you mentioned.

expert reply by: Jameson C

0

Answer 1

Hi Mike, If you're going to be running your 12V fridge, cooling fans, and display off your dual AGM batteries; you can use the Go Power Solar Flex Eclipse Charging System part #GP67MR with the addition of another panel. The Go Power Solar Flex…

view full answer...

Answer 2

Hey Edward, so the Furrion Solar inlet is a little annoying as it's its own unique style. They also don't have a y-branch adapter so you'd need the part #RS64VR as well as a Furrion to MC4 adapter which isn't something we have.

view full answer...

Answer 3

Hey Robert, glad to hear the project is coming together! Great question on the etrailer PWM Solar Charge Controller #e42PR , those “Solar Appliance” aka 12V appliance terminals are essentially a load output from the controller. They’re designed to…

view full answer...

Answer 4

No, when adding additional panels like the Go Power Solar Flex Eclipse Expansion Kit #GP77MR in parallel, you do not need a fuse for each panel. Since the panels are connected in parallel and then go through the charge controller before reaching the…

view full answer...

Answer 5

The em925rcw-b microwave you have is 19 inches wide x 11.375 inches tall and 14.8 inches deep. The outside trim is 20.625 inches by 15 inches and the cutout has to be 20.125 x 13.25 x 13.5 inches. The Greystone Built-in Microwave with Trim Kit - 0.9…

view full answer...

Answer 6

I'm sorry to hear about the motor ripping but we do have a replacement motor for your Lippert Stabilizer 337199. The correct replacement motor for that stabilizer is the Replacement Electric RV Stabilizer Jack Motor #LC352338.

view full answer...

Answer 7

Hi David, thanks for reaching out! The older Go Power PWM-30 Solar Controller has been discontinued, but you can use the Go Power PWM Solar Charge Controller with Bluetooth #GP76QR along with the Installation Adapter Plate #GP86QR to replace it! I…

view full answer...

Can Go Power Solar Flex Eclipse be Easily Added to Go Power Setup on RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching