Best Suspension Enhancement Recommendation for 2008 Dodge Dakota

Question

Question:

Before I pull the trigger, I want to make sure I am getting the best solution. I have a 2008 Dodge Dakota crew cab 4.7L 4x4. When I pull my trailer, I get a pretty good squat due to the tongue weight. This looks like the best solution minus bags to accomplish this: https://www.etrailer.com/Vehicle-Suspension/Dodge/Dakota/2008/SSA7MTKT.html?VehicleID=2008761603 With propane, cooler, trailer, etc…I am assuming around 400 pound tongue weight max. Thoughts on the best option? Thanks!

asked by: Jeff K

0

Expert Reply:

The best suspension enhancement we have for your 2008 Dodge Dakota is the RAS kit part # RAS4514 which gives you adjustable support, is easily installed, and unlike other options actually improves ride quality and handling while most options make it harsher.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Curt regarding the Curt TruTrack Weight Distribution System #C17499 that you are installing on your trailer. He said that you can install the support brackets 6 to 6-1/2 inches from the end of the spring bar without issue.…

view full answer...

Answer 2

The Curt TruTrack Weight Distribution System #C17499 is going to be approximately 12" from the hitch pin center hole to the center of the ball shank hole. The exact measurement will vary between vehicles as the head of the hitch is adjustable…

view full answer...

Answer 3

Going from an 8 inch long ball mount shank to a 12 inch long one like the part #D-26 won't make any noticeable changes in handling. It might be somewhat easier to back the trailer up as you basically have increased the length between the trailer…

view full answer...

Answer 4

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

view full answer...

Answer 5

In order to get more tension using the RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS3611 you'll need to expand the spring using the method outline in the instruction link below. The different holes on the axle brackets…

view full answer...

Answer 6

You are correct, the different holes on the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-HD bracket are there to give you the best fitment on your 2024 Chevy Silverado 3500. There isn't a set bracket hole for each vehicle…

view full answer...

Answer 7

Swapping out the shank of your Equal-i-zer WDH with a larger 18" shank would push the trailer back an additional 6" for more clearance but there's no way for me to confirm that your trailer would completely clear the tail lights on your…

view full answer...

Answer 8

I would be happy to go over how to determine which hole of the RoadActive Suspension Leaf Spring Enhancement Kit #RAS3612 will be correct for your 2008 Ford F-150 2WD. You are correct that this kit has 5 holes on the end of the #RAS3612 that goes…

view full answer...

Answer 9

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 10

I spoke with my contact at Curt who said that the ideal location for the brackets is 28" on your frame from the hitch ball for the Curt TruTrack #C17499. He did say that they designed this Weight Distribution (WD) system so that you have a…

view full answer...

Answer 11

Thank you for the photos of your Curt weight distribution system! I'm not sure what that number on the sticker means, but from the pics you sent in that looks to be a TruTrack system like what we see with part #C17499. Unfortunately Curt…

view full answer...

Answer 12

The Curt #C17499 TruTrack weight distribution system you'd looked at is designed for trailers with a fully loaded and ready to tow tongue weight ranging from 500-800 lbs, which is right around where your Micro Minnie would be. In addition to the…

view full answer...

Best Suspension Enhancement Recommendation for 2008 Dodge Dakota

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching