Hub Rotor and Disc Brake Replacement For A Saltwater Boat Trailer
Updated 04/11/2022 | Published 04/10/2022
Products Featured in This Question
Question:
I need to replace my Hub/Rotor and new brakes on my Saltwater boat trailer. I use Bearing, Race and Seal Information Bearings Inner bearing: 25580 Outer bearing: 15123 Races included Inner race: 25520 Outer race: 15245 and Seal 1-3/4: 22333. I need set up to fit Axle capacity: 5,200 lbs - 6,000 lbs #42 Spindle Wheel size: 15inch and larger Bolt pattern: 6 on 5-1/2 Rotor diameter: 12 Brake flange configuration: is 4 on my trailer vs the 5 listed in specs. What set up do you recommend or will this fit my trailer? I just replaced an old hub with KHR12D/Kodiak 12, 6 on 5-1/2, but my brakes are broken and will not fit with the Kodiak so I am attempting to find something to replace everything. Thank in advance.
asked by: Fred S
Expert Reply:
When it comes to replacing your Hub/Rotor and Brakes on your saltwater boat trailer I recommend The Kodiak Disc Brake Kit - 12 inch Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 pounds # K2HR526DKG.
This trailer disc brake kit includes two corrosion-resistant, Dacromet-plated hub-and-rotor assemblies, calipers, and mounting brackets. The dacromet coating provides superior corrosion resistance for freshwater or saltwater use, and has a 300 to 400 hour salt-spray rating.
The cast iron calipers are self-adjusting which provides a smooth, and equal braking experience. This conversion kit does require a 5 bolt mounting flange so if you do not currently have a 5 bolt flange welded onto your axle you will need to use the Redline Brake Mounting Flange # 4-44-1.
The inner bearing # 25580 and the outer bearing # 15123 and the seal # RG06-070 are sold separately. The races are included. Wheel studs are included but lug nuts are sold separately.
I attached a review video link below.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of Rebuild Kit for Titan Model 10 Actuator
- Q&A: Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655
- Q&A: Looking for Brake Line Kit that Fits TA96BT 23-27 EZLoader Boat Trailer
- Q&A: Recommended Disc Brake Assembly to Replace UFP Brakes on Boat Trailer
- Q&A: Disc Brakes for Boat Trailer With 5-Bolt Brake Flange and 6 on 5-1/2 Bolt Pattern
- Q&A: Do Specialty Recreation RV Shower Surround and Shower Pan Work Together
- Q&A: Mounting Hardware Required For Installing Dexter DX7.5L A-60 Brake Actuator # DX89FR
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: The Best Boat Bumpers
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Trailer Wiring Diagrams