How Does Curt Trailer Hitch C13417 Install on 2022 Ford Ranger

Question

Question:

Hello, I recently purchased a Curt 2” receiver for my 2022 Ranger. My vehicle has the factory bumper tow package. When attempting to install the new receiver I noticed there seems to be a few more mounting points than just the four frame rail bolts mentioned in the product description. Is there any extra assembly/parts I would need for installation?

asked by: Travis G

0

Expert Reply:

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number:

- Curt Trailer Hitch Receiver # C13417

Installation of the # C13417 on a '22 Ranger just requires removing the four factory bolts on your frame rails, putting the hitch into position, and using the factory bolts to secure the hitch to your truck. There are no other steps or parts needed to the hitch so it's super simple.

expert reply by: Kyle S

0

Installation of Curt Trailer Hitch C13417 on 2022 Ford Ranger
(click to enlarge)

Answer 1

I had our warehouse measure each of the front mount trailer hitch receivers you mentioned, and the dimensions are as follows. The Curt #31408 measures 32-3/4" long x 8-3/4" wide, the Draw-Tite #65080 measures 36-3/4" long x…

view full answer...

Answer 2

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

view full answer...

Answer 3

The #BWHDRH25122 has 35-5/8 inches between mounting holes like what you see in the picture I attached. Since you need larger than than let me know what vehicle you have and I can see which would be best fit.

view full answer...

Answer 4

The length from the inside of one mounting bracket to the other is 27" on the Curt Front Mount Trailer Hitch Receiver #31540. Distance from mounting holes center to center is 30" and the mounting plate thickness is 5/16". Refer to the…

view full answer...

Answer 5

No, there are not. The aftermarket hitches, like the etrailer item #e55KR, all mount below the original location of the factory hitch on your 2005 Ford Explorer XLT. I have attached a picture below to show you what it will look like once installed. I…

view full answer...

Answer 6

The Curt Front Mount Trailer Hitch Receiver #33055 that you referenced fits Ford Vans (up to an E-350), but since your Chateau is on a 2000 Ford E-450 you would need to go with the Draw-Tite #65001. Installation instructions and a photo showing the…

view full answer...

Answer 7

There is no reason why you couldn't install a front mount hitch and and add a front load bar to help support your Kayak and create more clearance between it and your travel trailer. The front mount hitch I recommend for your 2007 Toyota Sequoia…

view full answer...

Answer 8

I think I might have a solution you'd like but there isn't a dual hitch adapter that's going to have the capacity needed for the weight of your bike and carrier plus the tongue weight of your trailer. What you could do is install a front…

view full answer...

Answer 9

Whether the Ford E-450 van chassis is a 2002, 2003, or 2004 (or anything in the 200 to 2007 model year range) it will take front mount receiver #65001. So no worries, we got you covered! The Curt hitch, #33055, is indicated as a fit for the E-350 but…

view full answer...

Answer 10

The B&W Heavy-Duty Trailer Hitch, part #BWHDRH25122 is designed to fit a 1995 GMC C/K Cab And Chassis pickup. This hitch will fit pickups with a 34 inch frame and will not work on trucks that have dual fuel tanks. I pulled one of these from our…

view full answer...

Answer 11

The Curt #33055 you mentioned isn't a fit for the 1991 F-250, it's a fit for the E-Series Vans, which Curt confirms. Unfortunately, they don't offer a front mounted hitch for your truck. The bolt hole spacing I was able to obtain is as…

view full answer...

Answer 12

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25122 that will fit your 1986 Chevy K20 will measure 5.438" from the top of the frame brackets to the top of the receiver. If this is looking like it will not be enough to clear the bottom of…

view full answer...

How Does Curt Trailer Hitch C13417 Install on 2022 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching