What is the Total Height of the UWS Truck Bed Chest # UWS08298 with the Lid Fully Open?

Question

Question:

what is the height of the entire box with the lid open on the UMS 08298 TOOL BOX

asked by: John S

0

Expert Reply:

The height of the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft # UWS0829 when the lid is fully open from the bottom to the top is 31 inches tall.

expert reply by: Bob C

0

Answer 1

BAKFlip tonneau covers are going to interfere with opening the lid of the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box #UWS01048. Instead you can use a toolbox like the UWS Truck Bed Chest #UWS08297 or the #UWS08298 for black.

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 6

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Glen, It's good to hear from you again! If you're wanting to switch to the Roadmaster Comfort Ride system with the leaf spring, equalizer, and shock absorber upgrades, I recommend using the Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Answer 9

Hello Vernon, Great question. I actually reached out to Coleman-Mach to make sure. Based on what they told me, if your Keystone Alpine 3220RL was equipped with the In-Command system and factory prepped for a third AC, the Coleman-Mach Mach-C Everest…

view full answer...

Answer 10

Hey Ryan! The SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 will fit your 2023 Ram 3500. It is compatible with SRW and DRW trucks so it doesn't matter either way. It is also compatible on models with and without factory…

view full answer...

Answer 11

Hey Jerry, thanks for reaching out. The short answer is yes, probably but it really depends on your exact setup. When you slide the Companion back, you gain cab clearance but lose space at the tailgate, and with a MorRyde pin box being a bit bulkier,…

view full answer...

Answer 12

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

What is the Total Height of the UWS Truck Bed Chest # UWS08298 with the Lid Fully Open?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching