Is Trailer Hub and Drum Assembly # 8-219-20 Hub or Lug-Centric
Published 03/10/2022
Question:
Does this drum fit hub centered or lug centred wheels? If hub centered what is the hub center diameter?
asked by: Kenneth D
0
Expert Reply:
The trailer hub part # 8-219-20 is designed for wheels to center with the lug nuts. So it is a lug-centric wheel.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Determining Correct Replacement Electric Brakes for Used Travel Trailer
- Q&A: Can Replacement Left/Curb Side Leg e63VV Be Used As A Standalone Jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Proper Torque for Shackle Bolt for 1-3/4" Wide Double Eye Springs 007-003-01
- Q&A: Replacement Hub Solution for Dexter 8-155
- Q&A: Baking Plates for Electric Trailer Brakes
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Raise Your Travel Trailer Height
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Titan Hydraulic Trailer Parts
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision