Installation Video For TorkLift Front Mounted Camper Tie-Downs

Question

Question:

install instructions for TLF2022 for an F350. Pulling them off my truck and putting them on another truck.

asked by: Wilkins M

0

Expert Reply:

TorkLift doesn't have their instruction manuals posted online so I'm unable to find the exact step by step instructions, but I was able to find a video where Shane will walk you through installing a similar front mounted tie-down model to your # TLF2022 on a 2020 Ford F-250.

expert reply by: Kevin C

0

Answer 1

I checked with Reese on the two hitches you referenced and I can give you the following vehicle fit information. Hitch 35365 fits the following vehicles: 1978 - 1986 Chevrolet, G10, All Styles 1987 - 1995 Chevrolet, G10, All Styles 1978 - 1986…

view full answer...

Answer 2

Brophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part #HSWB but the #HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design,…

view full answer...

Answer 3

We have camper tie options for your 2018 Ford F-250 Super Duty but unfortunately, there is not a Happijac option for the Ford Super Duty trucks from 2016 to present day. In 2016 Ford switched over to aluminum beds, and in doing this Happijac was not…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

view full answer...

Answer 6

Hey Greg, thanks for reaching out. We do have an air bag kit and compressor for your 2022 Ford F-350 dually. For the air bag kit I recommend the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL86KV. This kit is made especially for the F350…

view full answer...

Answer 7

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 8

Hey Jeremy, thanks for reaching out! You definitely can connect the Air Lift LoadLifter 5000 Air Helper Springs #AL57388 to the ARB Twin Compressor on your 2020 GMC Sierra 1500 by using the ARB LINX Vehicle Accessory Interface Kit #ARB25DR as well as…

view full answer...