bing tracking image
Customer Service My Orders
Q & A Icon

Correct Shackle Size for Road Armor Shock Absorbing Equalizer Kit on 2014 Keystone Passport  

Updated 02/02/2022 | Published 01/31/2022



Question:

I have a 2014 keystone passport, the axels are 33 inch center to center. the holes on the T, from left to right are 6 inch the top hole is aprox 2 inch . what size shackel will i need? also will this system ride to close to the ground?

0

Expert Reply:

In order to find the right shackle strap length to go with the Road Armor Shock Absorbing Equalizer Kit # LC696740 on your 2014 Keystone Passport you will need to measure your current shackle straps. It is important to keep them the same length as the ones you currently have. See the diagram below which shows where to measure.

I recommend upgrading to heavy duty shackle straps and wet bolts in addition to the Road Armor equalizer. If you have 2-1/4" shackle straps you could use the # MR46ZR and if you have 3-1/8" shackles straps the # MR76ZR.

It is unlikely you will have any clearance issues but that will depend on your setup. The # LC696740 measures 7-1/4" from the center of the upper mounting hole to the bottom so there will be a difference when compared to your current equalizers.

I have attached some review videos as well as a link to our selection of shackle straps that you can check out.

expert reply by:
0
Robin H
Shackle Measurements.
Shackle Measurements.
(click to enlarge)
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching