Compatibility of Hub/Rotor, U-Bolts, Hangers, and Bearings for 6k Trailer Axle

Published 01/28/2022

Products Featured in This Question

Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs

(259)

$274.69

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear

(384)

$50.24

CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc

(1042)

$38.77

Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 1/2" Bolts - 7,000 lbs

(10)

$36.87

Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front

(128)

$59.49

Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs

(18)

$730.32

Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle

(198)

$860.00

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(649)

$11.96

Question:

Hi, before I order I need to confirm if these parts work together: e23GR - 6,000lb 89inch axle RM-2460 - Roadmaster Shocks Kit 5.2k to 7k APS4 - Hanger Kit CE23003 - U-bolt Kit 5.2k to 7k TRSS300 - Spring Seat 5.2k to 7k SP-111275 - 5 leaf for 6,000lb K2HR712D - Kodiak Disk 13inch 8 x 6.5 7k lb DBRKHW7 - Bearing Kit 13inch Rotor 1/2inch bolts - 7k lb The disks are for 7k lb, but the spindle is still #42 so I figured it should work. I need the 89inch axle, but no 7k lb available, and I need the 8x6.5 bolt pattern but not available as disk in 6k lb. so hope this works.

asked by: Travis K

Expert Reply:

The trailer axle components between a 5.2k and 7k trailer axle are essentially all the same so what you are wanting to do overall will work. The axle # e23GR is 3 inch in diameter so the shock kit part # RM-2460 will fit it. The hanger kit part # APS4 though is a single axle hanger kit and since the shock kit is for a tandem setup it's worth mentioning that and offering the tandem axle setup # H248.

The U-bolt kit part # CE23003 does fit the axle diameter, as well as the spring seat part # TRSS300. The hub/rotor part # K2HR712D also fits the spindle of the axle and the bearing kit part # DBRKHW7 would as well.