Weight Distribution Hitch w/ 7 Rise For 2021 Forest River Flagstaff E-Pro E15TB
Published 01/26/2022 >
Products Featured in This Question
Question:
I have a Redarc Tow pro elite in my 2019 Tacoma that I use to tow the same trailer. Can I get the Redarc tow pro for my Van instead of the Drawtite?
asked by: Mike R
Expert Reply:
Your 2021 Forest River Flagstaff E-Pro E15TB has a GVWR of nearly 3,900 lbs, so a good estimate for your loaded tongue weight is going to be in the 450 lb - 500 lb range. For that tongue weight, what you will need for a weight distribution hitch that will give you the rise you need is one from Blue Ox:
- Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank # BLU36FR
The TrackPro # BLU36FR has a maximum rise of 8 inch, and is for loaded tongue weights between 200 lbs and 600 lbs, which will be the exact range your loaded tongue weight is in. I really like this system's superior sway control at both the hitch head and brackets, which is better than other systems that just offer control at the brackets.
This hitch is also easier than other hitches to set up, with brackets that just clamp on and a hitch head that you don't have to continually adjust, which is something that a lot of other hitches require. It also comes with a 2" hitch ball, but if you need a 2-5/16" hitch ball you can add the Curt # C40030.
As for the wiring and brake controller, we can do that as well. Since you already have the 4-way, you will just need to add the 7-way with the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7.
This will allow you to install a brake controller, and by far my favorite option due to the value it provides with its combination of cost and quality is the Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR.
To install it you will also need the Brake Control Harness # 20127.

Product Page this Question was Asked From
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Tools Needed To Remove Trailer Hitch Ball From Blue Ox Weight Distribution System
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Hitch Receiver and Weight Distribution System for 2007 HS M30SFS and Trailer
- Q&A: Is Noise and Slightly Bent Trunnion Bars Safe for a Weight Distribution System
- Q&A: What is the Length of the Spring Bars on Curt MV Weight Distribution System
- Q&A: Weight Distribution System and Pole-Tongue Adapter Recommendation for 9,500 lb Boat Trailer
- Q&A: Installation and Torque of 1-1/4 Inch Shank Hitch Ball onto Ball Mount
- Q&A: What Size Wrenches are Used to Tighten the Curt Hitch Ball Part # C40030
- Article: Determining Trailer Tongue Weight
- Article: Most Popular Wheel Bearings
- Article: Which Hitches are Made in the USA
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
Mike R.
1/26/2022
I have a Redarc Tow pro elite in my 2019 Tacoma that I use to tow the same trailer. Can I get the Redarc tow pro for my Van instead of the Drawtite?