Customers compare TK63VR to these similar products
Products Featured in this Video
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Tekonsha BRAKE-EVN proportional, trailer brake controller for one to four axles. Now, this brake controller activates your trailer brakes in proportion to your vehicle's braking action. It automatically adjust your trailer's braking based on the deceleration of your tow vehicle. And it activates immediately.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…
view full answer...There are a few different trailer wiring harness options for a 2015 Jeep Wrangler Unlimited. The Hopkins Endurance Quick-Install 7-Way Trailer Connector part #HM42190 is only for models with the factory tow package. If you don't have the…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…
view full answer...The Curt hitch offered for your 2015 Kia Soul is a light-duty 1-1/4-inch Class I type, part #C11419, that has 200-lb tongue weight (TW) and 2000-lb gross trailer weight (GTW) ratings. But, and here's a big but, your 2015 Soul is NOT recommended…
view full answer...I would go with a 3/8 inch diameter, like #39035. That should provide enough space for the wires and still give good coverage. This loom comes in a 10 foot length. If you needed less of expect that you might have other wiring to run with the existing…
view full answer...I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…
view full answer...Yes, the copper side should be connected to the battery, the chrome side should be the output to the brake controller, trailer battery, etc.
view full answer...Because the Complete Propane Tank Holder Mounting Kit for 20-lb Tanks, part #37220BL, is designed to work with three different sizes of tanks, I can't say what the distance between the two tanks you choose will be. However, I can tell you the…
view full answer...We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…
view full answer...What you are going to need to do is install a 7-way on your trailer so that you can run a 12 volt accessory circuit from the connector to a battery like you are interested in doing. You should note that this will only maintain a fully charged…
view full answer...If you have a break away kit that does not include a charger, you can provide a charge to the battery using the 12 volt circuit or auxiliary circuit from the vehicle 7-Way trailer connector. However, using the 7-Way can overcharge a break away…
view full answer...