Spline Diameter Of The Replacement Trailer Hub Wheel Stud RG03-120

Question

Question:

Spline Dia.?

asked by: Dirck V

0

Expert Reply:

The spline diameter on the Replacement Trailer Hub Wheel Stud # RG03-120 is 0.69".

expert reply by: Bryce D

0

Answer 1

Hi Robert! The 17-1/2" wheels are a bit more limited than other offerings, but I think you may be interested in the following two options: Americana Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" - 8 on 6-1/2 -…

view full answer...

Answer 2

I have attached for you below a list of all our 17.5" x 6.75" trailer wheels with an 8 on 6-1/2" bolt pattern below. There are a few different types of wheels in this list such as aluminum/steel, dually/standard, and hub/lug centric.…

view full answer...

Answer 3

A Dexter 8k hub would have an 8 on 6-1/2 inch bolt pattern like what the part #TA45ZR has. This is also a 17.5 inch diameter trailer wheel. For a mod style wheel instead, we have the part #TA35ZR.

view full answer...

Answer 4

Hey Robert, To find your offset you'll need to measure from the mounting surface of your lugs to both outer edges of your current wheels. A negative offset will move the tire further away from the trailer while a positive offset brings the tire…

view full answer...

Answer 5

The Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim is offered in both silver as part #TA35ZR and white as part #TA36MR. That said, they are designed for use with 5/8" wheel studs. The only 17-1/2" wheels we offer…

view full answer...

Answer 6

It might be possible to change out the studs in your hub from 9/16 to 5/8 if they are drive-in studs and not the type that threads in. If they are drive in and the diameter of the knurl end is approximately 0.6875 inches then you can replace them. We…

view full answer...

Answer 7

Hey Don. The Taskmaster Modular Wheel item #TA35ZR works with 5/8" lug studs. It does not have a center cap. The pilot hole diameter is 4.76". This is a 17-1/2" wheel with a 8 on 6-1/2 bolt pattern. It has a 5,956 lbs capacity per…

view full answer...

Answer 8

I spoke with Phoenix USA and they let me know the inner diameter of the Phoenix USA QuickTrim Hub Cover #PXQT965CHN is 8" and the cylinder section that would allow the axle to slide up in is 5”.

view full answer...

Answer 9

Yes, you can upgrade from a 16" rim to a 17-1/2" rim if you have the clearance in your fenders and the right size studs. I recommend the Americana Modular Wheel w/ -0.5 Offset item #AM22461. This is a 17-1/2" x 6-3/4" rim with an…

view full answer...

Answer 10

We offer 2 17-1/2 x 6-3/4 wheels that have an 8 on 6-1/2 bolt pattern and a 4.76 inch pilot diameter. I'll run through them below. • #AM22461 is a modular style wheel with a silver powder coat with a -0.5 offset • #TA35ZR is a modular silver…

view full answer...

Answer 11

I can certainly point you in the right direction. I will start by saying that our "rule of thumb" is that we want at least 1" of clearance between the tire and the trailer frame. With the hub face currently at 48", you will want…

view full answer...

Answer 12

There is no way we can tell you what lug locks would be used on your 2019 Geo Pro 15TB is. What you're going to need to do is measure the lug studs on the trailer when you pick up the trailer. The most common sizes are: 1/2"-20 short #12CLN,…

view full answer...

Spline Diameter Of The Replacement Trailer Hub Wheel Stud RG03-120

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching