How Do I Remove the Pin from the Winch Strap Spool on My Detail DK2 Snowplow?

Question

Question:

Here are those photos. Any ideas?

asked by: Keith

0

Expert Reply:

Do you have a photo of the spool and what screws/bolts hold it together?

expert reply by: Bob C

0

My Detail DK2 Snowplow Winch Strap Spool
(click to enlarge)

Keith

1/1/0001

Here are those photos. Any ideas?

Bob C.

1/17/2022

Thanks so much. I went ahead and reached out to my contact at Detail DK2, and he confirmed that you either have one of two different spool designs for replacement your winch strap with the # K2WS8020. The first type requires the use of a hex wrench with pliers, and the other one only requires pliers to pull of off that pin. Both of these methods will loosen up the strap. From the looks of your photos, it looks like you have the hex bolt version (the opening on the black part of the pin). If you are still having trouble, feel free to respond and I will have some other troubleshooting methods for you.

Answer 1

We don't have a video that details how to replace the strap of your K2 Winch like part #K2RASP8219, but I did speak to my contact at K2 and he gave me a brief description of the process. On the winch there is a u-bolt that needs to get removed…

view full answer...

Answer 2

The threaded pin needs to be unscrewed in order to remove the Replacement Winch Strap for Detail K2 Snowplows #K2WS8020 on your Summit K2SUSP8826.

view full answer...

Answer 3

You will want to use the Replacement Winch Strap for Detail K2 Snowplows #K2WS8020. This strap is rated for the weight of your SnowBear Snowplow #K2AVAL8826. The working load is 1,500lbs with a break strength of 3,000lbs. The Replacement Strap for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

How Do I Remove the Pin from the Winch Strap Spool on My Detail DK2 Snowplow?

Product Page this Question was Asked From

Continue Researching