To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the nylon strap on the winch of your Detail K2 snowplow. Strap is strong and quieter than chains or metal cables.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this replacement wind strap for your Detail K2 snowplows. Now, this is going to replace the wind strap on your Detail K2 snowplow. And on your screen, I'm putting there what it's going to fit. It's gonna fit the Rampage, the Rampage II, the Storm, the Storm II, the Summit, the Summit II, and then the hitch-mounted plow. So for your easy reference, I included all the model numbers there for you just so you can be confident this is going to be the one that you are going to need.
The durable nylon is not going to make noise like chains or metal cables. A bolt and a washer are included. Now, the maximum load or brake strength is 3,000 pounds and the safe working load limit is 1,500 pounds. And let me go ahead and lay this flat again here for you. Put that into frame.
Give you some measurements here. So looking at the overall length, I hope you can see there, we're sitting right at 29 inches long. And then width, let me bring this up here, about 1-3/4 inches wide. Actually a little bit over, I'm gonna call it about 1-9/16 inches wide, so 1-9/16 inches wide. As for these loops, it's gonna be a little bit hard to put a ruler up to it, but that's gonna measure about 1-3/4 inches on the loop lengths.
Well, I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Jenny N.
1/31/2024
I checked with K2 and they have changed this strap's color to black. We were unaware and will be updating the picture on our site. This strap still has a safe working load limit of 1500 lbs and a maximum load break strength of 3000 lbs. If you need a strap with a higher safe working load please let me know and I will look for options for you.
Ben
2/10/2022
It’s working flawlessly.
Edward
1/24/2024
Strap is working perfectly, no signs of wear.
Joe
1/24/2022
Great
Do you have a question about this Snow Plow Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William L.
1/2/2019
Still working great. No problems