What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
Updated 01/18/2022 | Published 01/16/2022
Products Featured in This Question
Question:
what is the correct spacing for the hangers when using e46SR 29 1/2inch springs and apt6se 12inch hanger kit.
asked by: Lonnie R
0
Expert Reply:
I went ahead and attached a diagram that shows the spacing of the hangers on the 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long # e46SR. This is the spacing you will use with the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers # APT6SE.
expert reply by:
Bob C
0
Hanger Spacing of the 6-Leaf Slipper Spring # SP-161275
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Bushing Not Included
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Search Results: 1403t3
- Search Results: apubr~8
- Search Results: e5115
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Video: An In-Depth Look at the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Search Results: spring hanger kit
- Search Results: sp~169275 1020
- Search Results: tandem axle hanger kit
- Search Results: pr722
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: CE Smith Front/Rear Hanger for Double-Eye Springs - 1-7/16" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Q&A: How to Find Replacement Leaf Springs and Shackles for 1967 Aristocrat Camper
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU62FR
- Q&A: What is Advantage to Single Leaf Trailer Leaf Spring
- Q&A: Spring Spring Hanger Spacing for Spring e46SR
- Q&A: Can Leaf Spring Part # e46SR Be Mounted Above and Below Trailer Axle
- Q&A: Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
- Shop: Gooseneck Hitch
- Q&A: How Are Slipper Springs Attached to Equalizer and Hangers
- Video: Feature Review 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Video: Detailed Breakdown of the 5-Leaf Slipper Spring w/ Radius End for 10,000-lb Trailer Axles
- Q&A: Replacement Spindle Recommendation for Dexter # 42