How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
Updated 08/18/2015 | Published 08/17/2015 >
Question:
Hello, I just purchased Redline Trailer Suspension - AP216-H238 for a trailer Im repairing and had a few questions. Its a 1999, 6CAM16 Superline, tandem 7k axles with five leaf springs. The old hangers were already gone and I need to know if its 30 1/2inch from center to center of the new hangers? I see you answered a question similar to this on a 4K, four spring trailer, your tech said 30 1/2. I would like to see if my application is the same as well.
asked by: Garrett
Expert Reply:
There isn't a specific distance the hangers have to be for hanger kit # AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers.
To determine where the center between the 2 axles should be, and then to work and add the hangers from there, you can follow the formula in the picture I have included. Once you know where the center between the 2 axles should be it would just be a matter of placing the hangers and other components in the proper positions.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 48-1/2" Axle Spacing
- Video: In-Depth Review of the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Q&A: Hanger Kit Recommendation for use with 29-1/2 Slipper Springs with 7000-lbs Tandem Axles
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Video: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs: The Breakdown
- Video: All About the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Q&A: Trailer Lift Kit For Stock Trailer
- Q&A: Hanger, U-Bolt, and Slipper Spring Kit for 8k Trailer Axles
- Shop: Suspension Enhancement
- Search Results: nylon bushings trailer leaf springs
- Search Results: leaf spring bushings
- Search Results: trailer suspension parts
- Q&A: Axle Spacing To Use 29-1/2 inch Long Leaf Springs with Slipper Axle Tandem Hanger Kit # AP216-H238
- Q&A: How Are Slipper Springs Attached to Equalizer and Hangers
- Q&A: Hanger Spacing when Using 12 Inch Long Slipper Spring Equalizer E4541-Z
- Search Results: timbren bump stops
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 2" Long
- Search Results: standard equalizer trailer suspension parts
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Search Results: timbren vehicle suspension
- Search Results: bump stops
- Video: Review of M-3 and Associates Trailer Ramp Springs - Single Ramp Spring - M366FR


