When you’re hauling big gear or equipment, every pound matters. This 15" x 6" aluminum wheel carries up to 2,960 lbs without the heft of steel. The lighter build helps reduce strain while still giving you the load strength needed for larger setups.
Weather, water, and grime don’t stand a chance against this rustproof aluminum design. There’s no paint or powder coat to chip, so it stays clean and solid over time. It’s a simple way to keep your setup looking sharp without worrying about corrosion setting in later.
The gloss black surface and machined spoke accents give it that polished, modern edge that looks good anywhere you tow. If you ever want a splash of color, it’s ready for optional red or blue inserts that snap right in for a quick custom touch—no tools or paint needed.
No guesswork here. The 6 on 5-1/2 bolt pattern matches up cleanly with standard 6-lug hubs, so mounting is easy and reliable. Wheel bolt size is 1/2"-20 with a pilot diameter of 3.74", giving you clear specs for a precise fit right out of the box.
This wheel isn’t just about looks—it’s built to perform under real conditions with a solid warranty behind it. The 2-year limited warranty gives extra peace of mind that it’s made to last through heavy use and regular towing duty.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Americana 15 Inch by 6 Inch AM06 Series Black Machined Aluminum Trailer Wheel with the six on 5-1/2 inch bolt pattern. Now this is an aluminum wheel. It's durable, lightweight, and rust-proof. And we mention it's the AM06 Series wheel, which you can see is a six open-spoke design.
Has a nice glossy black finish with the machine finish on the face of the spokes, provides a nice, bold, sleek look. Now they do use a clear coating on both the front and even the back of the wheel to help protect the finish. And if you notice on this wheel, it does not come with the center cap. If you do want a center cap, we do sell those separately on our website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole 'cause when you install that center cap, it's gonna go through this hole.
The pilot hole diameter right here is 3.74 inches. Now the rim dimensions themselves, the diameter, which is always gonna be measured inside to inside or bead seat to bead seat, you can see if we put our tape measure on it, there's your 15 inch measurement. The diameter, the width is gonna be the same way, inside to inside or bead seat to bead seat. There's your six inch width. And the bolt pattern on this wheel is a six on 5-1/2 inch bolt pattern.
And if you wanna measure that on a wheel like this, that's an even number of lugs, in this case, 6, it's pretty simple because the lug holes, if you notice, are directly across from each other. So if you measure the bolt pattern, pick any hole, let's say this one, measure from the center of this lug hole directly across to the center of the hole right across from it. On this wheel, it'll measure 5-1/2 inches. So that'll tell you this is a six lug 5-1/2 inch bolt pattern. It does use a wheel lug size of the half inch by 20, and the weight capacity on this wheel is 2,960 pounds.
Now this wheel does meet the DOT, Department of Transportation, specifications and the SAE J 2530 standards. Well, that's gonna do it for a look at this Americana 15 Inch by 6 Inch AM06 Series Black Machined Aluminum Trailer Wheel.
Customer Satisfaction Score:
77% were satisfied with this product
23% of customers were not satisfied
Ratings & Reviews
I love shopping with etrailer. Great prices, great selection and the orders arrive very quickly. Couldn’t be happier!
just as advertised, worked good and look good.
Wheels look great, shipped well and super fast delivery. Will definitely come back for any trailer needs.
The packaging on these wheels was the best I’ve seen from any parcel delivery in a long time. Once installed, they completely transformed the look of my Tracker trailer. If you want to upgrade your Tracker Panfish trailer wheels, this is the upgrade you want.
Condition: Surface Scratches
Notes: Item has minor cosmetic paint chips and scratches. Otherwise, item is in like new condition.
Condition: Surface Scratches
Notes: Item has minor cosmetic paint chips and scratches. Otherwise, item is in like new condition.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.