Troubleshooting An EverChill WD-282FWDC RV Refrigerator That Wont Cool

Updated 05/06/2025 | Published 12/16/2021

Products Featured in This Question

Everchill RV Refrigerator w/ Freezer - Reversible Doors - 10.7 cu ft - 12V - Stainless Steel

(52)

$2097.01

Digital Multimeter with 42" Long Test Leads - LED Display

(3)

$21.20

Question:

We have a WD-282 The temperature setting light flashes and we are loosing temperature. We have tried the “10 second” rule. Please help.

asked by: Hanna L

Expert Reply:

We carry the Everchill RV Refrigerator w/ Freezer, # 324-000119 the replacement model for the WD-282FWDC. But each are similar. Note that it will easily take an hour or more to reach set temperature, depending on ambient temp at start. It will always get cold in the freezer first and is best to check operation of a full refrigerator, not empty. This is most easily accomplished by simply placing containers of water in the refrigerator to increase mass. Please check to ensure that all coils and vents are clean allowing full air flow. This unit requires at least 11.5v DC to properly work. You can use a voltage meter # PT89ZR to check the voltage running to the outlet and if you're getting less than 11.5v DC you'll need to increase the gauge of your wiring running from the battery to the outlet.

If replacement is needed, please follow the link for Everchill RV Refrigerator w/ Freezer, # 324-000119.

expert reply by: Michael R

Wiring
(click to enlarge)

Kendra

4/22/2025

Where is the defrost panel at on model WD-282FWDC-B? The freezer and refrigerator won’t get cold but we can hear the fan running in the freezer. This is a Everchill Rv refrigerator

Jameson C.

5/6/2025

@Kendra The defrost panel is behind the vents that you can see on the back wall of the freezer compartment. When it's activated you should see a red glow behind the vents. If yours isn't working it's possible the drain is clogged and the melted condensation has no where to go.