Recommended Adjustable 2 Ball Coupler To Replace A Lunette Ring On A Trailer

Updated 12/06/2021 | Published 12/05/2021

Products Featured in This Question

Curt Pintle Hook - Bolt On - 20,000 lbs

(530)

$86.62

Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Zinc - 2" Ball - 10,000 lbs

(585)

$137.22

Question:

I have a trailer that has a vertical channel mount with a pindle ring like your part Item # 358LOOP. I need to convert it to a 2 ball hitch. Do you have what I need?

asked by: William C

Expert Reply:

If you are replacing your current lunette ring, you will need to check on 2 measurements to make sure a coupler will fit your channel. First will be the width and second will be the hole spacing.

As an example, the Demco Trailer Coupler - Adjustable Channel Mount # DM12688-95 will fit a 3" wide channel and will have 2" hole spacing when measured center to center. This is also designed for the use with a 2" ball and will have a 10,000 max capacity. Odds are this will match what you have as it is a very common size, but I definitely recommend double checking, just to make sure.

expert reply by: Lazer S