Stealth Hitch Hidden Rack Receiver Installation Instructions for 2018 Tesla Model 3

Question

Question:

Can you email me the Installation instructions for the Stealth Hitch receiver for 2018 Tesla Model 3 Thank you.

asked by: Jesse H

0

Expert Reply:

Yes, I would be happy to. I have linked those instructions below and I have also attached a couple of install videos for you as well.

expert reply by: Jerred H

0

Answer 1

Hi Denys; you must be referring to the factory reinforcement beam or the base plates. Removing these won't hurt anything and isn't uncommon for a hitch with this design. The instructions for the #391TES317 actually allow for the…

view full answer...

Answer 2

Hey Cynthia, Good question, and the best to store and hang your Kuat NV 2.0 #NV22B bike rack in your garage is actually a solution directly from Kuat, called the RackDock: - Kuat RackDock Garage Bike Rack Docking Station - Orange #KU34FR or Black…

view full answer...

Answer 3

The reason why there is a slight slope on the rack is because it helps a bit with ground clearance with the weight of the bikes on the Kuat Sherpa 2.0 2-Bike Platform Rack #SH22G. With the angle, it helps prevent drag in the back. I went ahead and…

view full answer...

Answer 4

If the issue is that your Kuat Sherpa Hitch bike rack #SH12G when installed in your Prius' hitch tips to one side, you might try loading the bikes facing in opposite directions. Some bikes can be heavier towards the front or rear and so loading…

view full answer...

Answer 5

If you check out the test course video I attached for the Kuat Transfer TS02G that shows how stable it is on the road you'll see that the rack is supposed to be pretty stable once the hitch pin is tightened. What is most likely going on is that…

view full answer...

Answer 6

The Stealth Hitches Hidden Rack Receiver #391TES317 for your 2021 Tesla Model 3 comes with the 2" receiver but you can also get the 1-1/4" Receiver Attachment #391RR1 for your 1-1/4" accessories.

view full answer...

Answer 7

Kuat makes some of the nicest bike racks around the new Kuat Sherpa 2.0 part #SH22G is basically an updated version of the Sherpa #S101 which was highly reviewed by our customers. The new Sherpa is lighter (by 8 lbs for a total weight of 32 lbs), has…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Stealth Hitch Hidden Rack Receiver Installation Instructions for 2018 Tesla Model 3

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching