Can 86 inch Crossbars be Added to Malone MegaSport Trailer  

Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs #MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475. It sounds like you are just…

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support Tubes…

The weight capacity for the set of crossbars part #MPG475 is 165 lb so it wouldn't have the capacity for the 210 lbs you mentioned. You'd have to look into the Malone trailer part #MAL53FR which has a higher 400 lb capacity and would work…

The Malone MegaWing Kayak Carrier #MPG207 referenced in your question is a great option for your Old Town Fishing Kayak that weighs around 120 pounds. The MegaWing is made specifically for heavier fishing kayaks like this and its 150 pound weight…

The U-Bolts that arrive with the Malone Crossbar Conversion Kit #MPG475 Hardware Kit are 1/2" U-Bolts that 6" long & 2" wide.

Hey Lyn! The Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475 will definitely work on a trailer like yours. The lower section is 45" long and will sit down in the trailer and attach to the floor/crossmembers with U-bolts. With…

The Malone Crossbar Conversion Kit item #MPG475 comes with two 78" crossbars that are 13-3/4" tall when put together. The crossbars are made of 1-1/4" square steel so you will have about 11" - 11-1/4" of a gap inside the…

I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…

The Malone TopTier Load Bar Kit for Utility Trailers part #MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part…

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

Hey Roman! The Malone Crossbar Conversion Kit #MPG475 is designed to be added to a utility trailer. You can probably get this work with your EcoLight #MAL53FR but it isn't necessary. What you can do instead is trade out your existing 58"…

I checked with Malone about the Malone Crossbar Conversion Kit for Standard Utility Trailer part #MPG475 and confirmed the weight capacity as 400 lbs evenly distributed.