Replacement Idle Hub for Pace 5x8 Enclosed Cargo Trailer
Published 11/23/2021
Products Featured in This Question
Question:
I have a pace 5-8 with a torsion axle. Which 5-4.75 hubs do I need? Non brake. Thanks
asked by: Doug
Expert Reply:
It looks like your Pace 5x8 trailer has a Dexter Axle 3,500 lb axle. If you can confirm this then that means you'll need part # AKIHUB-545-35-EZ-K for a 5 on 4-1/2" bolt pattern or part # AKIHUB-5475-35-EZ-K for a 5 on 4-3/4" bolt pattern. I do recommend double checking what your bolt pattern is because while 5 on 4-3/4" isn't unheard of, the 5 on 4-1/2" bolt pattern is much more common.
I'm attaching some helpful articles on bolt patterns that you can reference to double check.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 5x475 hub
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: How To Check a Trailer Axle To Determine Bearing Sizes For a 5 on 4-3/4" Idler Hub
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Brakes and Axle for 1997 Magic Tilt Boat Trailer
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs