Recommended Trailer Cover for a 7x14 Enclosed Trailer

Question

Question:

Can you tell me what trailer cover will fit my 7 X 14 X 7 foot high encolsed V nose trailer? I measured and know it is the 18 foot length I need. Nowhere on your site have I seen mentioned about height in descriptions of the covers. thanks

asked by: Doug

0

Expert Reply:

The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 18' Long # 290-46005 measures 216" long x 106" wide x 94" tall. Since you have a 14' trailer though I think the Cover # 290-46004 would fit better since it's for trailers up to 16' long. This cover measures 192" long x 106" wide x 94" tall.

We usually don't mention the height because the cover manufacturers take height into account when they are making the covers, so the covers are pretty much always the correct height for the trailer (as long as you've chosen the correct style and size of cover).

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 2

For your 7' x 16' V-Nose enclosed trailer I recommend the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46005. This is designed for trailers up to 18' long so you'll have a little bit of extra material for an easier fit. There…

view full answer...

Answer 3

For your utility trailer, there aren't specific covers made, however you can use a travel trailer cover for your application. I recommend the Adco Olefin HD RV Cover for Travel Trailers up to 18' - All Climate + Wind - Gray #AD37ZR or the…

view full answer...

Answer 4

Hi Tom, We have two axles rated for 3.5K that have an 85" hub face measurement, but they have different spring seat measurements. The Lippert Beam Only Trailer Axle part #LC93PK has a 70" spring center to spring center measurement and fits…

view full answer...

Answer 5

The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 18' Long - Gray #290-46005 will be the closest option we currently have available. This will definitely fit your trailer, but it will not be able to completely cover the coupler and…

view full answer...

Answer 6

Hey Tim! For a boxed cargo trailer with the body sitting over most of an A-Frame tongue then you'll want to use the Adco SFS AquaShed Trailer Cover #290-46004 because it's tailored for that style of trailer. If you have a different style…

view full answer...

Answer 7

I looked up the Sunset Park RV Sun-Lite 16BH and the official length is listed at 16' 6" therefore in order to find the correct cover we'll need to subtract 3' for the tongue and round up which means we're looking at a cover for…

view full answer...

Recommended Trailer Cover for a 7x14 Enclosed Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching