Recommended Trailer Hitch Receiver and Wiring Harness For a 2021 Chrysler Town and Country
Published 11/19/2021 >
Products Featured in This Question
Question:
I just picked up a 2021 Chrysler Grand Caravan and I am need a receiver and wiring needed for hauling my bikes. What do you recommend I get?
asked by: Mike G
Expert Reply:
For your 2021 Chrysler Town and Country I recommend the etrailer Trailer Hitch Receiver # e98854. This 2" class III receiver has a matte black powder coat finish that will better blend with the fascia panels on your Chrysler making it appear to be a factory receiver. The 2" receiver will open up the amount of bike racks that you can use with your Chrysler. Since you are looking at bike racks the measurements that you want to know is the hitch pin to bumper measurement of 4" and the height to the top of the receiver at 14". These are important to ensure you have the clearance necessary for your bike rack. These are the measurements we had when we installed this on a 2019 Grand Caravan so your measurements could vary slightly.
For the wiring you will need the Curt Vehicle Wiring Harness # C56331 to use with the Auxiliary Lights # C53201 or other light kit your bike rack may have. This 4-way flat connector will also work with small trailers if you will need to pull a trailer.
If you plan on pulling larger trailers like a small travel trailer in the future you will want to install the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # ETBC7 so that you won't have to change it out later. This will give you a 7-way connector that will fit larger trailers that require an electric brake controller. For a brake controller I recommend the Tekonsha Prodigy P3 # 90195
For a bike rack I recommend the Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G. This rack will allow for your to carry 2 bikes up to 60lbs each with 25"-29" wheels. A repair stand is built into the rack in the event you need to preform a repair while you are out. You can also add the 2-Bike Add-On # NA22G in the event you need to carry more than 2 bikes. This will allow for an additional 2 bikes up to 40lbs each.
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Determine the Correct Replacement Wiper Seal For an RV Slide-Out
- Q&A: Trailer Hitch Recommendation for 2016 Dodge Grand Caravan
- Q&A: Can the Napier Sportz SUV Awning Be Used with Minivans?
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Q&A: What Roadmaster RSSC Reflex Steering Stabilizer Brackets For A 2025 Ford E450 Chassis?
- Q&A: Hitch Needed to Mount Swagman Original 4 Bike Rack # S64400 on 2014 Chrysler Town and Country
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Which Hitches are Made in the USA
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)





