Fitment of Prest-O-Fit 4-Piece Step Rug Set for 1st Gen MORryde StepAbove RV Steps

Question

Question:

Hello, The description of this product says fist the first generation steps, but does it also fit the second generation MORryde steps as well?

asked by: Ted W

0

Expert Reply:

The Prest-O-Fit 4-Piece Step Rug Set for 1st Gen MORryde StepAbove RV Steps, # PR65MR are designed for first generation MORryde StepAbove steps that have a width of 19-1/2". Please measure the width of the steps you wish to use these on for comparison but yes they will fit with other steps aside from just the 1st Gen MORryde StepAbove.

expert reply by: Jesse M

0

Answer 1

You will want to look at the legs of your steps to determine which MORryde steps you have. If your MORryde steps have a pull pin then you've got the 1st generation. If you have a button that releases the legs for adjustment, you have the second…

view full answer...

Answer 2

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Seaflo Diaphragm Pump for Boats and RVs - Variable Flow, #SE96FR has connections that allow it to connect to 1/2" lines but it does not come with a PEX ready fitting. I have contacted the Vendor to discuss options and they informed me that…

view full answer...

Answer 7

Hey Todd, thanks for reaching out! The TorkLift Tie Downs #TL67DR is the standard design while the TorkLift Tie Downs #TL44PR is the same thing, just upgraded to aluminum for better corrosion resistance.

view full answer...

Answer 8

Hi George! We are sure the Westin Outlaw Nerf Bars with Drop Steps - Textured Black Steel #W32RX will fit your 2024 Chevy Silverado 3500HD, as long as it is a double cab model. And just to be even more sure, I did just confirm that with Westin as…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

Hey Michael, we actually have a cover designed for the Blue Ox Alpha with the part #BX8875. Are you just wanting a cover for the tow bar?

view full answer...

Fitment of Prest-O-Fit 4-Piece Step Rug Set for 1st Gen MORryde StepAbove RV Steps

Continue Researching