Parts Needed to Flat Tow 2020 Jeep Gladiator
Published 11/11/2021 >
Products Featured in This Question
Question:
Hello, my wife and I would like to understand all of the details and products surrounding flat towing our 2020 Jeep Gladiator Rubicon behind our motor home. The jeep has a 2.5 inch lift and 35 inch tires. No other modifications have been made that would affect a baseplate / flat tow.
asked by: Paul W
Expert Reply:
We have all the parts you'd need to flat tow your 2020 Jeep Gladiator but since the vehicle is lifted it may be possible you'd need a high low adapter so that the tow bar would sit level, but you should keep in mind that a tow bar can be 3 inches out of level and be okay.
The first thing you need is a base plate kit which is what provides the connection between the tow bar and the front of the vehicle. Which for that you'd need the part # RM-521453-5.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Flat Tow Parts for a 2025 Jeep Wrangler Sport Towed By A Tiffin RV w/ Quick Connect Air
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Trailer Wiring Diagrams
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How To Tell If My Jeep Needs A Brake Light Relay When Flat Towing
- Q&A: Which Tow Bar is Better Blue Ox Avail # BX7420 or Roadmaster Nighthawk # RM-676
- Article: Must-Have Flat Towing Components
- Q&A: Can a Battery Disconnect be Installed on the Positive and Negative 2020 Buick Encore GX Terminals?
- Q&A: Which Bumpers Can I Flat Tow a Jeep Wrangler JLU With Using D-Ring Adapters
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Recommended Complete Flat Towing Setup for a 2024 Jeep Wrangler


