What Are the Dimensions of the Buyer's Products Hitch Plate # 3371809067?

Updated 11/11/2021 | Published 11/10/2021

Products Featured in This Question

Buyers Products Hitch Plate w/ 2" Receiver and ICC Bumper for Dodge/Ram Cab and Chassis - 20K

(60)

$660.05

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide

(566)

$424.59

Question:

What is the dimension of the bolt holes side to side? I am hoping to use this hitch. My frame rails are 34 inches apart and the existing holes are 32 inches on center. Also what is the length of the mounting flange? What is the dimension of the flange to the cross bar?

asked by: Stephan W

Expert Reply:

The distance between the bolt holes from side-to-side on the Buyers Products Hitch Plate with Receiver Tube # 3371809067 are 35.05 inches apart. The height of the mounting flange is 6-1/2 inches. The distance between the bottom of the flange to the crossbar is about 8-3/4 inches. I went ahead and attached photos of the spec sheets available from Buyer's Products.

If you are wanting a more adjustable hitch option, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. This hitch has adjustable brackets that will be able to mount onto your 34-inch frame. However, since this hitch is a universal installation, it will require drilling into your frame to use the pre-drilled bolt holes on the mounting brackets.

Also, depending on your year/make/model of vehicle, we may have a custom-fitted hitch available. To see if we do have one, I would happy to assist you if you provide your year/make/model of your vehicle.

expert reply by: Bob C