How Far Out Will The Coupler Sit On The Demco DM14791-97 A-Frame Coupler?  

A standard 50 degree coupler like #DM14793-81 will work on your custom 45 degree frame with a little modification. Without welding shims the coupler will not have the strength, so you will need to make some adjustments to your current tongue design.…

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

The inside dimension of the Demco A-Frame Trailer Coupler w/ Jack Hole, part #DM14791-97 is 2-12 inches. I have attached a photo of the underside of the coupler with the dimension noted for you.

The Bottom Support Plate for 2-1/4" OD A-Frame Jacks - 5,000 lbs #JSP-100 you mentioned is 1/8" thick, has a hole diameter of 2.29", 8-3/4" long at the back, 5-1/2" long at the front, the diagonal sides are 3-7/8", and…

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached some…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

Hey Michael, welcome back! The Alpha Systems 1021 Self-Leveling Sealant #AL98KV is going to do the same thing as Dicor as long as we're talking about a self-leveling sealant. The main difference is going to be the branding. They both use a butyl…