Replacement Slide-Out Seals For A 2013 Keystone Bullet 246 RBS Travel Trailer

Updated 11/08/2021 | Published 11/07/2021

Question:

2013 KEYSTONE BULLET 246 RBS single slide out , im worried about getting product and ether being wrong or to hard to replace Thanks

asked by: Karl K

Expert Reply:

To get right seal you'll need to remove a portion of the seal to get the side profile of your current seal. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are multiple styles and measurements the seals; some come with a bulb, some don't.

For example the Rubber Wiper Seal with Bulb for RV Slide Out - 3/16" Flange - 40' Long x 2-7/8" Tall # SR38FR you were looking at will come with the bulb and is a press on design that will grip onto a track.

If you can pull just a couple of inches of the seal out to get the side profile and measure the length we'll be able to get you the correct replacement for your 2013 Keystone Bullet 246 RBS travel trailer.

expert reply by: Kevin C