Ball Mount With 9 Inch Rise For Friction Sway Control

Updated 03/21/2022 | Published 11/07/2021

Products Featured in This Question

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3583)

$22.58

Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" XL Shank - Nickel

(536)

$83.69

Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch

(486)

$74.64

Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs

(1355)

$119.78

Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span

(2933)

$9.46

Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV

(319)

$44.40

Question:

I have Audi Q5 Tdi trailer hitch hieght is high I need a 9 inch rise and friction sway control is there a set up you could recommend it would be greatly appreciated

asked by: Colleen B

Expert Reply:

We can get you set up with a ball mount with a 9 inch rise that will work with friction sway control, and there is one ball mount that has that rise which will work for you. I'll go ahead and list out all the parts you'll need:

- Convert-A-Ball Ball Mount for 2" Hitches # AMSC10

- Reese Friction Sway Control Kit # 83660

- Reese Sway-Control Bracket for 2" Ball Mounts # RP26003

- Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" XL Shank # 105TB

- Pin and Clip # C21510 or Trailer Hitch Receiver Lock # e98880

This is the only ball mount that has the rise you need, and the bracket will attach to it so you can use the friction sway control. You'll need the extra long shank of the hitch balls to make sure you have the needed threads to secure hitch ball's nut, and the pin and clip or lock will secure the ball mount to your hitch.