Correct Slide Topper Awnings for Jayco Eagle HT 312BHOK

Question

Question:

I have a 2022 Jayco Eagle HT 312 BHOK 388inch with 3 slide. I need two slide toppers one 127 5/16 x 22inch and the other is 84 11/16 x 35 3/4. their is 11 1/4inch between them. I need white toppers. what would be the right topper for me?

asked by: Richard E

1

Helpful Expert Reply:

The correct slide topper awnings for a Jayco Eagle HT 312BHOK are as follows:

Solera RV Slide-Out Awning - 11'1" Wide part # LCV000163295

Solera RV Slide-Out Awning - 7'1" Wide part # LCV000163287

expert reply by: Conner L

1

Answer 1

Hey Darrel. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580 is without a doubt the best upgrade you can make to your Grand Design's suspension system. It's going to come with everything you need to swap out…

view full answer...

Answer 2

I would be happy to help! The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 is for trailers that have 7000lb tandem axles, and use springs that have a 3500lb capacity each (one spring on…

view full answer...

Answer 3

Hey Keith, welcome back! The Dometic FanTastic Roof Vent w/ 12V Fan and Thermostat #FV803350 is a great replacement option. This has all of the features you could possibly want in a fan and fits the same standard 14-1/4" x 14-1/4" opening…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Correct Slide Topper Awnings for Jayco Eagle HT 312BHOK

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching