Replacement Shank for 1,000 lb/10,000 lb Fastway e2 Weight Distribution System

Question

Question:

Cant find on Website the Shank only part for a Fastway e2 1000/10,000 weight distribution hitch

asked by: Rick

1

Helpful Expert Reply:

The shank that comes with the Fastway e2 weight distribution systems rated for 1,000 lbs/10,000 lbs is part # FA92-02-4100.

This shank does use the industry standard 1-1/4" adjustments so if you're needing something a little longer or taller I'm linking our selection of replacement weight distribution shanks for you to filter through.

expert reply by: Jon G

1

Rick

10/29/2021

Thanks Jon for quick response

Answer 1

Hey Rodney, congrats on the new trailer! So long as you keep your tongue weights below 800 lbs the 8,000 lbs Fastway e2 Weight Distribution w/ 2-Point Sway Control item #FA94-00-0800 will still work on your new travel trailer. You'll be at the…

view full answer...

Answer 2

I recommend the Curt weight Distribution Shank, part #C17122. This shank measures 18 inches overall and 14-inches from the center of the hitch pin hole to the attachment holes for the head. This shank has a 15,000-lb weight capacity and this shank…

view full answer...

Answer 3

Yes, the Curt weight distribution shank part #17120 is a fit with the Fastway E2 WD system part #FA92-02-4100 that you referenced. Thankfully nearly all of the weight distribution system manufacturers made their head and shank dimensions similar.

view full answer...

Answer 4

To find the correct rise or drop what you need to measure is the from the ground to the top of your hitch receiver opening, which it sounds like you have done and got 25-1/2". You also need to measure from the ground to the bottom of the…

view full answer...

Answer 5

I am sure we can get you set up with the parts you will need to get a little more clearance between the truck and trailer. Curt shank #C17122 measures 14 inches from the center of the hitch pin hole to the center of the adjustment holes so it will…

view full answer...

Answer 6

Since the tongue weight of your Lance 2185 Travel Trailer is 755lbs unloaded you can and should replace the spring bars, as the head assembly used for the 600lb/6000lb system is the same as the 800lb/8000lb, 1000lb/10000lb, and 1200lb/12000lb…

view full answer...

Answer 7

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Shank for 1,000 lb/10,000 lb Fastway e2 Weight Distribution System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching