Parts Needed To Install A Trailer Tail Light That Has 4 Wires
Published 10/13/2021 >
Products Featured in This Question
Question:
My fiance bought led utility trailer lights and they came with no wiring directions. Each light has 4 wires coming from it. I have attached photos. I need to know which wiring harness to buy for them and which color wires would match up to those on the harness. I was used to trailer lights having only 2 wires. ??There are no side marker lights on the trailer. Please let me know what is the best avenue for this set-up.
asked by: Johanna
Expert Reply:
I am unable find any lights like these that have the 4 wires for attaching to the light. You should be able to test each of the wires for their function using a 12 volt battery and connecting the wires directly to the terminals. My only concern is that your lights were set up to have separate brake light functions and that is why you have 4 wires. If that is the case and you want the lights to function properly you will have to run additional wiring and components as opposed to just using a traditional 4-Way Trailer Wiring Harness # A25W2GWB.
We do offer the Optronics Combination LED Trailer Tail Light # STL9RGB and # STL8RGB that do have the 2 wire connections that you are more used to seeing. One wire for the turn signal/brake light and one wire for the running lights. The ground connection is tied to the mounting studs on the lights.
To use the lights that you already have, if they do have a separate brake lights you will need to use a 3rd Brake Light Logic Module # PP20-702 that ties into the wiring in the front of the 4-way. Then you will need to run a dedicated Wire # DW02359-1 to each of the brake light connectors on your tail light.
Product Page this Question was Asked From
Miro-Flex LED Trailer Light w/ Reflector - Brake, Tail, Turn - Submersible - Oval - Red
- Trailer Lights
- Tail Lights
- Stop
- Tail
- Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2-5/16W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Peterson LED Combination Tail Light - Submersible - 7 Function - 6 Diodes - Square - Passenger Side
- Shop: ONE LED Trailer Tail Light - 6 Function - Submersible - Square - Red Lens - Passenger Side
- Shop: Peterson Piranha LED Clearance or Side Marker Light w/ Reflector - 2 Diodes - Rectangle - Amber Lens
- Q&A: What Size Wire Gauge Do 4 Pole Connectors Use
- Video: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel Feature Review
- Video: Checking Out the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel
- Video: A Closer Look at the Peterson LED Combination Tail Light
- Article: Basics of Tie Down Straps
- Shop: LED Trailer Combination Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side
- Shop: Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side
- Search Results: optronics trailer light replacement lens
- Q&A: Should Ground Wire of Trailer Wiring Run to Frame of Trailer or Back to Light Assemblies
- Q&A: Compatiblity of STL9RGB and STL8RGB LED Lights with Trailer With Physical Ground Wire
- Article: Trailer Wiring Diagrams
- Video: Detailed Breakdown of the 35 Ft 4-Way Trailer Wiring Harness
- Search Results: wire connectors wiring
- Search Results: optronics led clearance or side marker light ~ submersible ~ 3 diodes
- Video: In-Depth Review of the 25 Ft 4-Way Trailer Wiring Harness
- Search Results: butt connectors wiring
- Search Results: carlisle tire
- Q&A: Grounding a 4-Way Wishbone Trailer Connector
- Q&A: Ranger Boats LED Trailer Light Pigtails Adapter Availability
- Q&A: Recommended Trailer Wiring Harness for a Boat Trailer
- Q&A: Replacement 5-Way Connector for Ranger Boat Trailer






