Blue Ox Parts Needed to Flat Tow 2021 Ford Ranger

Published 09/27/2021

Products Featured in This Question

Blue Ox Base Plate Kit - Removable Arms

(4614)

$604.95

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(397)

$1499.89

Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs

(751)

$954.61

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3187)

$175.28

Roadmaster Brake-Lite Relay Kit for Towed Vehicles

(702)

$47.75

12 Volt Outlet Kit, 20 amps

(331)

$40.45

Question:

Looking to purchase a Blue Ox base plate for my 2021 ford ranger to flat tow. I will also need a 4 diode wire kit and a connector for the front of the truck . The MH has a 7 pin connector . So what Items do you recommend for purchase Thanks

asked by: Mike S

Expert Reply:

The Blue Ox base plate kit part # BLU77XR that you referenced is a confirmed fit for your 2021 Ford Ranger and is what provides the connection point for a tow bar to attach to. I believe the connector for the front of the truck that you mentioned is a tow bar which is a standard component for a flat towing setup.

One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. This has 4 diodes like you mentioned wanting as well.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. To power this you'll also need the outlet kit part # RM-9332 and the brake lite relay # RM-88400.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.