Replacement Inner Member for Tie Down 75LP Brake Actuator
Updated 09/29/2021 | Published 09/26/2021
Question:
I want to replace my inner slide on my Tie Down 75LP. However, from what I can tell from the image of the DX39 FR, the rear pin is in a much different location as compared to my Tie Down 75LP. Is the DC39FR a direct replacement without any field modification? It also looks like the solenoid on the DC39FR is a two wire versus a single wire on my Tie Down unit. Thank you for your help.
asked by: Tony S
Expert Reply:
The Replacement Inner Member for Dexter DX7.5L Actuator # DX39FR is the correct replacement for Dexter DX7.5L and Legacy UFP Brake Actuators which includes your Tie Down 75LP.
The two wires are connected to the reverse lock-out solenoid, one of the wires would be grounded to trailer frame and the other connects to your reverse light so when you reverse the solenoid locks out the coupler allowing you to back up the trailer.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
more information >
Continue Researching
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: Weld-On Barrel Hinge with Grease Zerk - Round Body - Steel - 4-3/4" Long - 3/4" Diameter
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Search Results: utility trailer tailgate hinge
- Search Results: hinge
- Shop: Bent Roller Ramp Door Hinge Pin - 10" Long - 3/4" Diameter
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Search Results: bearing buddy bra
- Search Results: grease cap
- Video: Review of the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: plug
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs
- Video: Review of Redline Trailer Door Hinges - Hinge Pin - HP34412G
- Video: Breaking Down the 1/2" Diameter Hinge Pin Nipple, 2-1/4" Long
- Shop: 40 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Search Results: ts20066bmp
- Q&A: Do You Have a Master Cylinder and Shock Absorber for My UFP A-160 Surge Actuator?
- Q&A: What Info Is Needed to Pick Out Replacement Surge Actuator for Trailer
- Search Results: farm jack
- Q&A: Replacement for Dexter 34044 Hydraulic Disc Brake Actuating Trailer Brake Coupler
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Q&A: How the Shock Absorber Works on a Surge Brake Actuator
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: Kodiak Disc Brakes Spec Review
- Shop: Suspension Enhancement
- Video: Hands-On with the Dexter Premier Disc Brake Kit
- Video: Comprehensive Review: Replacement Inner Member for Dexter DX7.5L Actuator