Can Fascia Panel Be Reinstalled After Draw-Tite Hitch is Installed on 2019 Jeep Grand Cherokee

Question

Question:

Good afternoon, I am now ready to order the #DT38MR but I have another question to get a better feel for this fit. This is a 2019 Jeep Grand Cherokee Limited X with the 5.7 hemi. In installing this hitch, will I be able to reinstall the factory facia panel when the hitch is not in use? This has the rectangular factory installed dual exhaust tail pipes please see pic. Please clarify that this hitch will fit and that the facia is removeable and I would be able to reinstall the facia when the hitch is not in use. Thanks

asked by: DAN L

0

Expert Reply:

My contact at Draw-Tite confirms that once their 76432 hitch which we offer as part # DT38MR is installed on a 2019 Jeep Grand Cherokee Limited X, the door in the fascia WILL be able to be reinstalled. You'll remove it to use the hitch, and replace it when you're not.

If you click the provided link, you can see an install video for the hitch.

expert reply by: Mike L

0

Fascia Panel on 2019 Jeep Grand Cherokee Limited X
(click to enlarge)

Answer 1

Hey Beaux, I attached a link to all of the hitches we offer for your 2014 Jeep Grand Cherokee EcoDiesel but my favorite is the Draw Tite part #DT38MR which once installed fits behind the rear bumper panel so that it can be totally hidden when not in…

view full answer...

Answer 2

Hey Ryan, yes the Yakima LockNLoad Platform Rack #Y44NJ does fit your 2024 Jeep Grand Cherokee 4xe with flush roof rails.

view full answer...

Answer 3

For your 2020 Jeep Grand Cherokee Limited X I would recommend the Draw Tite hitch part #DT38MR which fits behind the rear fascia panel when not in use so it's totally hidden, has plenty of capacity, and installs relatively easy. Then for trailer…

view full answer...

Answer 4

We do not have any installs pics for the Curt Hitch #C13065 on a 2014 Jeep Grand Cherokee Altitude, but we do have install pics on a similar Grand Cherokee. I attached these pics, install instructions and an install video for you to check out.…

view full answer...

Answer 5

We have confirmed that the Draw Tite part #75699 fits the 2020 Jeep Grand Cherokee Limited X which is also a fit for the SRT models. This would be the correct fit for your Limited X. I prefer this over the Curt you mentioned as it has only the hitch…

view full answer...

Answer 6

I would be happy to help you set up a towing package for your 2021 Jeep Grand Cherokee. You're going to need a hitch, wiring harnesses, brake controller, and ball mount. For your hitch you are going to want the Curt Trailer Hitch Receiver item…

view full answer...

Answer 7

Yes, for your 2020 Jeep Grand Cherokee that isn't equipped with the factory tow package, the Tekonsha T-One Vehicle Wiring Harness #118727 will work perfectly. This custom harness is going to plug into existing ports behind the tail lights and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hi Peter! I have a full Roadmaster flat towing set up listed below for your 2024 Ford Maverick Hybrid, as well as the Demco braking system. Good call going with these brands as well. All the parts I have listed are American made! Oh, before you check…

view full answer...

Can Fascia Panel Be Reinstalled After Draw-Tite Hitch is Installed on 2019 Jeep Grand Cherokee

Featured Help Information

Miscellaneous Media

Continue Researching