How To Convert Old Trailer To 7 Way Wiring.

Updated 09/21/2021 | Published 09/18/2021

Products Featured in This Question

Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat

(472)

$34.94

Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard

(925)

$46.90

Clearance or Side Marker Trailer Light w/ Reflex Reflector - Rectangle - Amber Lens

(4007)

$5.85

Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens

(2074)

$15.81

Optronics LED RV Exterior Scene Light - Submersible - 1,200 Lumens - 12V/24V - Clear Lens

(24)

$92.98

Question:

The trailer is converted for kayaks. I am adding new LED brake lights and side marker lights. I would also like to add scene lights for early morning and night time to see better to set up the kayaks. I think converting to 7 pin so it matches my Ford and will also allow a constant power lead for the scene lights. What do you recommend? Do I need to add a battery to the trailer for the scene lighting? Rather not. Thanks

asked by: Ben

Expert Reply:

You can convert your trailer with the Hopkins 7-Way RV Style Connector with Molded Cable # H20046.

As far as lighting we also have the Optronics LED RV Exterior Scene Light that is submersible # UCL41CB. The Optronics LED Trailer Tail Light that is stop, turn, and tail. Also submersible # STL78RB. Then I would suggest the Clearance or Side Marker Trailer Light w/ Reflex Reflector # MC35AEB.

You could always add a battery for backup and to lessen the pull on your tow vehicle but I do not think it will be needed.