Which HydraStar EOH Kit Is Compatible With The OEM Controller In My 2016 Ram 2500?

Question

Question:

have a 2016 dodge ram 2500 with factory electric brake controller. Do i use the 8067 plug and play or the 9067. thanks

asked by: John

0

Expert Reply:

The factory trailer brake controller in your 2016 Ram 2500 is compatible with the Hydrastar Marine Electric Over Hydraulic Actuator without the # HBA-CAM so you will just need the EOH Kit # HS381-9067 as it is the version without this.

With that said we have found the factory trailer brake controllers like you have in your truck are not the most reliable with EOH actuators, so if you find you have issues your best bet will be replacing the controller with the Tekonsha Prodigy P3 # 90195 using plug-in wiring harness # 3024-P.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

view full answer...

Answer 2

The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the…

view full answer...

Answer 3

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

view full answer...

Answer 4

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88231 are typically what I recommend for anyone who wants to stick with Air Lift. The jounce bumpers add extra support at low air pressure and prevent bottoming…

view full answer...

Answer 5

Brake calipers are typically installed so they point toward the back of the trailer, but it is okay to install them pointing up or toward the front of the trailer. The important thing to consider when installing the calipers is to make sure at least…

view full answer...

Answer 6

The difference is the material the Bearing Buddy is made from. The part #BB2047SS is made from stainless steel and the #BB2047 is chrome plated steel. Stainless will hold up to corrosion much better.

view full answer...

Answer 7

While we do not carry a replacement cap which will allow you to convert your hubs from oil bath to grease we do have a hub and all the components you will need to install a new setup which can be filled with grease. You will need one of each per hub.…

view full answer...

Answer 8

Brake calipers are typically installed so they point toward the back of the trailer, but it is okay to install them pointing up or toward the front of the trailer. The important thing to consider when installing the calipers is to make sure at least…

view full answer...

Answer 9

The calipers of the Kodiak Disc Brake Kit part #K2HR712 that you referenced can basically be installed in whichever orientation you like. BUT the key is to pick a location that will allow one of the bleeder valves to point up so that when you go to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Which HydraStar EOH Kit Is Compatible With The OEM Controller In My 2016 Ram 2500?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching