Which Replacement Bronze Bushings Fit Equa-Flex Cushioned Equalizers?  

The correct replacement bushing for your Dexter E-Z Flex equalizers is part #D014-077-00. This comes as a quantity of 1 but you can get a 4 pack as part #K71-291-00.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I spoke to my contact at Dexter and he told me they do not offer the rubber cushion as a replacement for the EZ Flex Equalizer like the part #K71-652-00 that you referenced. You would need to replace the entire equalizer. The thinking is that if the…

You will have no problem using a Dexter brake assembly on a Lippert 7K axle. We have installed several Dexter brake assemblies on Lippert axles at our shop. Lippert and Dexter use the same standard mounting pattern and brake sizes. If you want…

The #D014-077-00 has the same dimensions as the #TRBU11566 except it comes in bronze instead of nylon.

We have a replacement hardware kit for the Lippert Equaflex equalizers with the part #LC64FR. This comes with everything you mentioned aside from the bushings. Or you could go with the Never Fail bushing kit part #LC281285 which includes the same…

The Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K #LC279688 used to come with the Never Fail bushings already installed. So if you needed to replace them, they were covered under your warranty. Currently they use bronze…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

Hey Jason, so we know that your 2020 Grand Design Solitude 390RK does have 8k axles so in terms of capacity the leaf spring part #e89FV that you referenced would work but we don't have a way to verify the length of your current springs so you…

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…