Westin Truck Bed Mat That Fits 2018 Ram 3500 With 8 Foot Bed

Question

Question:

2018 Ram 3500. Will this rubber mat fit a 8 foot bed? 50-6195

asked by: Aaron

0

Expert Reply:

We do have a Westin bed mat that fits your 2018 Ram 3500 with an 8 foot bed, but the part # 50-6195 is for the 6-1/2 foot bed and won't fit the longer bed. Instead, the correct fit for your '18 Ram 3500 with an 8 foot bed is the following:

- Westin Custom Fit Truck Bed Mat # 50-6305

expert reply by: Kyle S

0

Answer 1

It sure is Joe, and welcome back! The Roadmaster Rear Anti-Sway Bar item #RM46GR is definitely compatible with the TorkLift SuperHitch item #TLD1108 installed on your 2014 Ram 3500. This sway bar is meant to replace and upgrade your factory one. Do…

view full answer...

Answer 2

Hey Russ! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is definitely the way to go. The SuperSprings #SS62FR will help but they're better for additional support and you already have the Timbren SES on there. The Hellwig anti-sway bar…

view full answer...

Answer 3

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 4

Yes, the perfect solution for you is the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP, which is specifically designed to work with the GM MultiPro Tailgate. As you can see int the attached photo, the angled design provides clearance for the…

view full answer...

Answer 5

Yes, absolutely we have what we think is the right ball mount. It is the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate, #BWTS20066BMP and currently has a 4.9 rating from users. When you're not towing, you can flip the…

view full answer...

Answer 6

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

view full answer...

Answer 7

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a point…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…

view full answer...

Westin Truck Bed Mat That Fits 2018 Ram 3500 With 8 Foot Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching