Replacement for P10490 Grease Seal
Updated 09/07/2021 | Published 09/05/2021 >
Products Featured in This Question
Question:
I am looking for a bearing seal P10490. Goes on bearing L44649. OD of seal is 1.987. ID of seal is 1.21. Markings on seal are the following: TCS P10490 TB 1.250 1.979 0.250 12 I would need two of these. Do you have any?
asked by: Fabio S
Expert Reply:
We do not have a seal that matches the inner and outer diameter you have provided. That being said, I believe the markings on the seal actually indicate that your ID is 1.25" and our OD is 1.979". Your measurements are incredibly close to this so you may want to double check to be sure.
From my research, I have found that the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 is interchangeable with a seal that is sometimes marked as the 12192TB with an ID of 1.25" and OD of 1.979". This would be the seal I recommend.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.50 Inch I.D.
- 1.99 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: l44649
- Search Results: grease seal
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Search Results: bearing buddy
- Search Results: bearing buddys
- Search Results: 34823 seal
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Grease Seal
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Timken Replacement Trailer Wheel Bearing - L44649
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Search Results: 12192tb
- Q&A: Grease Seal With 0.50 Inch Width, 1.68 Inch Inner Diameter and 2.33 Inch Outer Diameter
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Bearing Kit for 1-1/16" BTR Spindle
- Q&A: Looking for Spare Carrier for Wood Rail Trailer
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: What Timken Bearings, Races, Washer, and Cotter Pin do I Need for My 2,200 BTR Spindle/Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires


