Troubleshooting Dexter EOH Actuator That Stopped working with Integrated Brake Controller

Updated 08/31/2021 | Published 08/30/2021

Products Featured in This Question

Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi

(123)

$993.89

Adapter Module for BrakeRite Electric Over Hydraulic Actuator - OE Ford, GM Brake Controllers

(86)

$145.05

Question:

I have a 2021 5th wheel. Just towed it over 3,000 miles with no issues. On the way home i noticed it taking longer to stop. I used the manual control and nothing happened. It’s an F350 with factory brake controller, set to proper control. Where should I start checking.? Is there a fuse other than the chassis fuse? I see no sign of leaks at the wheels. I’m home and i must unhook to get the front compartment door open. Thanks.

asked by: Jim R

Expert Reply:

Typically when trailer brakes stop working the solution is cleaning off the pin of the 7-way as some corrosion or dirt is preventing the connection from being made.

Otherwise we see a lot of inconsistent brake controller performance with electric over hydraulic actuators if the controller is an integrated one on the vehicle. The solution for this is the adapter part # DX35FR or an aftermarket brake controller we know works well with the EOH setups like the P3 part # 90195.

expert reply by: Jameson C