Does Air Lift 1000 Helper Springs AL60830 Fit A 2021 Jeep Gladiator Mojave W/ Factory 1-1/2" Lift?

Question

Question:

Hi, I see you have a recommend model for the Jeep Gladiator AL60830 and I need to know if it fits the Gladiator Mojave version. I believe the Mojave sits about 1.5inch higher than other Gladiator models and I want to get the correct air bags. Thanks!

asked by: Mike

0

Expert Reply:

I reached out to my contact at Air Lift and she was able to confirm that the Air Lift 1000 Air Helper Springs # AL60830 you were looking at for your 2021 Jeep Gladiator Mojave will still fit perfectly.

She mentioned that the factory 1-1/2" Lift your Mojave has is not enough to cause the springs to not work properly.

In addition to the helper springs I recommend adding an on-board air compressor kit # F2610 which allows you to adjust the air pressure in the helper springs from your smart phone.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

If the spacing between where the Air Lift 1000 Air Helper Springs for Coil Springs #AL60830 mount to your 2022 Jeep Gladiator will be increased by 2" then it will be a problem, yes. Since this looks to be the case I actually recommend using the…

view full answer...

Answer 2

Hi Jonathan; that doesn't sound right, do you have a picture you can send? I'm sorry to say that Air Lift does not make a heavier air bag for your 2020 Jeep Gladiator. The #AL60830 is the only option. If you really want to stick with air bags…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 9

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 10

Hey John! The air bags I recommend for your 2022 Ford F-350 are the Firestone Ride-Rite Air Helper Springs #F35FV. Firestone air bags have the best construction making them the most reliable. These are designed with four layers of reinforced rubber…

view full answer...

Answer 11

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 12

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Does Air Lift 1000 Helper Springs AL60830 Fit A 2021 Jeep Gladiator Mojave W/ Factory 1-1/2" Lift?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching