Which B&W Companion Base Fits the 2022 Chevy Silverado 3500HD

Question

Question:

Will this base fit a 2022 Chevy HD3500 with the factory puck system?

asked by: Mike J

1

Helpful Expert Reply:

Yes. The Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC - 20,000 lbs # BWRVB3710 does fit in the OEM prep package on the 2022 Chevy Silverado 3500HD.

expert reply by: Erik B

1

Answer 1

The market for used Companion hitch bases isn't nearly as strong as used complete Companion fifth wheel hitches. So what would be the best solution that I would recommend for you would be to sell your old hitch as a complete unit instead of…

view full answer...

Answer 2

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 3

There is no specific height that you have to have in order to use a 5th wheel hitch, they are height adjustable by several inches and so is the pin box on most trailers. What you do need though is at least 5"-6" from the bed rails to the…

view full answer...

Answer 4

While the 6'9" bed in your 2022 GMC Sierra 2500 is slightly larger than the typical standard/short bed we still recommend a sliding hitch to ensure you have the proper clearance when turning your 5th wheel trailer. Having said that I…

view full answer...

Answer 5

Yes, you will want to use a sliding fifth wheel hitch since your 2022 GMC Sierra 2500 has a standard sized bed. This will help prevent the nose of your 5th wheel from coming into contact with the cab of your bed when making turns. The only exemption…

view full answer...

Answer 6

It is possible that you can get away with a fixed 5th wheel hitch in your 2022 GMC Sierra 2500 with the OEM puck system, but typically this is only possible when the trailer has a rotating pin box or really tapered nose to allow for more…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Hi Scott, Really good question and yes, all of the necessary hardware that is needed for installation comes with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. I've added a photo for you…

view full answer...

Answer 12

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Which B&W Companion Base Fits the 2022 Chevy Silverado 3500HD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching